Bauerfeind GenuTrain S Pro knee support with movement restriction

€360,96
SKU: Y13-1-LFT
Free shipping on orders over €50
30-day returns policy
Secure payment
MobilePay
Klarna
Apple Pay
Google Pay
Visa
Mastercard
30-day return policy
This is a CE-marked medical device

Medical device

Medical devices can range from simpler products such as plasters or creams to advanced diagnostic methods such as magnetic resonance imaging. Through the CE marking, the manufacturer guarantees that the product is safe to use and meets applicable requirements. The product’s effectiveness must be substantiated by data from clinical trials, clinical experience, or scientific studies.

Bauerfeind GenuTrain S Pro provides increased stability for mild to moderate knee instability. Hinged side supports on both sides guide the joint and can be adjusted to limit flexion and extension.

  • Hinged supports that can limit flexion and extension
  • Straps around the thigh and lower leg for a firm, secure fit
  • Silicone pad that surrounds the kneecap and keeps it in place
  • Train knit with alternating compression massage
  • Large fastening straps that make the support easier to put on
  • Right or left, seven sizes

Stabilization with adjustable range-of-motion limitation

Bauerfeind GenuTrain S Pro is a medical support brace with side hinges that provides better stabilization of the knee joint and limits its range of motion. According to the instructions for use, it is used for mild to moderate joint instability, knee osteoarthritis, arthritis such as rheumatoid arthritis, and meniscus injuries.

How the support works

The hinges on both sides of the knee guide the joint, protect against unwanted and painful movements, and can limit bending or extension when necessary. A silicone pad gently surrounds the kneecap and keeps it securely in place, while the straps around the thigh and lower leg provide a firm and secure fit.

According to Bauerfeind, the soft Train knit provides pain-relieving compression and alternating compression massage with every movement, activating the leg's stabilizing muscles, improving their coordination, promoting metabolism, and helping swelling subside.

Adjustment and materials

According to the instructions for use, bending can be limited to 30°, 60°, or 90°, and extension to 20°, using screws in the hinges. The support is anatomically pre-shaped, and both the hinges and straps can be removed.

Material composition according to the manufacturer: polyamide (PA), glass fiber (GF), copper-zinc alloy (CuZn), thermoplastic elastomer (TPE-SEBS), polyurethane (PUR), elastodiene (ED), elastane (EL), viscose (CV), polyoxymethylene (POM), polyester (PES), and cotton (CO).

How to choose the size

GenuTrain S Pro is available in Titan, in seven sizes, and in separate models for the right and left knee. Measure the upper circumference 14 cm above the knee and the lower circumference 12 cm below the knee:

  • Size 1: upper 38–41 cm, lower 28–31 cm
  • Size 2: upper 41–44 cm, lower 31–34 cm
  • Size 3: upper 44–47 cm, lower 34–37 cm
  • Size 4: upper 47–50 cm, lower 37–40 cm
  • Size 5: upper 50–53 cm, lower 40–43 cm
  • Size 6: upper 53–56 cm, lower 43–46 cm
  • Size 7: upper 56–59 cm, lower 46–49 cm

Feel free to compare it with our other knee braces.

Use

Loosen all four ends of the hook-and-loop straps without pulling them out of the openings. Hold the donning loops on the sides and pull the support over the knee until the pad surrounds the kneecap without pressure - the ends of the straps will then be on the outside of the leg. Pull the straps until the stabilisation feels comfortable and fasten all four ends. To remove the support, open the straps, grasp the support at the calf and pull it downward.

Care

Remove the hook-and-loop straps and fasten them closed, then pull the hinge splints upward out of the hinge channels. Wash the support separately in a laundry bag with mild detergent at 30 °C on a delicates cycle and spin at no more than 500 rpm.

When the support is dry, insert the hinge splints from above according to the marking, with the hinges facing the back of the knee, and fasten the straps to the loops on the splints. Never expose the support to direct heat, such as radiators, sunlight or storage in a car.

In the package

One (1) knee support for the selected side with hinge splints and straps. Five screws for the hinge splints are included, one of them a spare screw.

About Bauerfeind

Bauerfeind AG is a family-owned company founded in 1929 and headquartered in Zeulenroda, Thuringia, Germany. According to its own information, the company is one of the world's leading manufacturers of medical aids - supports, orthoses, compression stockings and orthopaedic insoles. Bauerfeind is an official partner of the NBA and, since 2013, has provided around 3,800 elite athletes with supports, orthoses and medical compression stockings as a service partner of Deutsche Sporthilfe.

Important information:

GenuTrain S Pro is a CE-marked medical device in risk class I. Read the instructions for use before using the product. They specify when the product should only be used after consulting a doctor and the risks associated with its use. Follow them and the instructions you receive from a doctor or healthcare professional, and do not make any alterations to the product yourself.

According to the instructions for use, stop using the product and contact a doctor if the symptoms worsen or if you notice any changes. As its effect is greatest during physical activity, the support should be removed during longer periods of rest.